Table of Contents
Advertisement
OLIMEX© 2014
A13-OLinuXino user's manual
CHAPTER 7: SCHEMATICS
7. Introduction to the chapter
In this chapter are located the schematics describing logically and physically A13-OLinuXino.
7.1 Eagle schematic
OLinuXino schematics may be found it on the OLinuXino's GitHub repository:
https://github.com/OLIMEX/OLINUXINO/tree/master/HARDWARE/A13-OLinuXino. You can
download the whole repository as .zip without having a GitHub account.
We mostly use Eagle by Cad Soft 4.16r2 for designing. However, the files should be compatible
with the latest Eagle available. Cad Soft offers a trial version of their software that allows you to
inspect schematics and board files (without being able to modify them).
This work is licensed under the Creative Commons Attribution-ShareAlike 3.0 Unported License.
To view a copy of this license, visit http://creativecommons.org/licenses/by-sa/3.0/.
If you are looking for a schematic of an older revision of the board and it isn't available at our web
site you may request it by the support e-mail.
Note that A13-OLinuXino-WIFI has all the components shown in the schematics. The stripped
down version (A13-OLinuXino, without the -WIFI part) lacks two components: the NAND
memory and the embedded WIFI module RTL8188CU. To reduce this document's size only one of
the schematics is listed.
Page 32 of 37
Advertisement
Table of Contents
