Mitsubishi Electric LS Pro Hardware Technical Reference page 65

The following illustration shows the controls.
HEIGHT
HORIZONTAL VERTICAL
PHASE CENTRE
Power switch
Select the 'O' position to turn the monitor off.
Select the 'I' position to turn the monitor on.
Contrast
This control varies the difference in intensity between the black and white areas of the
display.
Brightness
This control varies the average intensity of illumination of the display, and should be
set to give the required level of brightness.
Note
Avoid setting the brightness and contrast controls for an excessively bright display. If such a
display is left on the screen for an extended period the screen phosphor may be damaged.
Width
This control adjusts the overall width of the on screen image.
Vertical centre
This control adjusts the vertical position of the display area.
Height
This control adjusts the overall height of the on screen image, and only affects the
800x600 display mode.
Horizontal phase
This control adjusts the horizontal position of the display area, and only affects the
800x600 and 1024x768 display modes.
Peripheral items
WIDTH CONTRAST
BRIGHTNESS
LS PRO HARDWARE TECHNICAL REFERENCE 4/5
ON/OFF
SWITCH