Opening the system unit
It may be advantageous on some occasions to use the 'Energy Saving'
features of the computer. Press the purple button on the front panel and
put the system into 'Low Power'. This will provide a quick start up next
time you use the system.
The only tool required is a medium cross head screwdriver.
Turn off the computer, along with all peripherals, and unplug all power
cords before removing the top cover. Take suitable antistatic precautions
while the system cover is removed.
Turn off both the system unit and the monitor and unplug all
power cords from rear of the system unit.
Remove the two casing screws, and put them to one side.
Release the caselock or remove any locking device from the
loop, if fitted.
Slide the top cover rearwards slightly, then lift it off.
Refitting the cover is simply a reversal of the procedure.
10 10 1
LS/VS550 OWNER'S HANDBOOK
F i r s t s t e p s