Mitsubishi Electric LS Pro Hardware Technical Reference page 120

Specifications
Environmental (operational)
Temperature ............................................................................................................ 5 to 35 °C
Humidity ........................................ 10% to 80% relative humidity with no condensation
Power supply
AC input 110-120V ................................................................................................................... 3.0A(max)
220-240V ................................................................................................................... 2.5A(max)
50-60Hz
Note
The AC input ratings include 1.5A for the AC output.
AC output 110-120V
220-240V ................................................................................................................... 1.5A(max)
DC output 40 Watts (total)
Voltage
+5V
+12V
-12V (nominal)
-12.1V (actual)
Note
The +12V output has a rated surge capacity of 2A for 10 seconds.
MTBF > 50000 hours
Input to output isolation .................. withstand minimum of 3750V RMS for 1 minute
Input to output resistance ................................. minimum of 100Mohms @ 500V input
Input to earth isolation ..................... withstand minimum of 1275V RMS for 1 minute
Earth continuity ................................................... maximum 0.1ohm at 20A current flow
Sony MP-F17W
Height ........................................................................................................................... 25.4 mm
Width .......................................................................................................................... 101.6 mm
Depth .......................................................................................................................... 150.0 mm
Weight ................................................................................................................................ 425 g
Rotational speed .......................................................................................................... 300 rpm
Track density ................................................................................................................. 135 TPI
Cylinders .................................................................................................................................. 80
Tracks ..................................................................................................................................... 160
R/W heads ................................................................................................................................. 2
Encoding Method .............................................................................................................. MFM
A/2 LS PRO HARDWARE TECHNICAL REFERENCE
Current Tolerance
(pk to pk)
±0.1V
5 Amps
±0.4V
1 Amp
±0.6V
200mA
1.5A(max)
Ripple
150mV
100mV
150mV