Using The Reset Button - Arris Touchstone TM902 User Manual

Getting
Safety Started
TM902A/B
Ethernet
Tel 1 Tel 2 10/100/1000 Reset
Reset Button
Ethernet
Tel 2
Tel 1 10/100/1000 Reset
TM902S
Installation

Using the Reset Button

Use the Reset button, on the back of the Telephony Modem, to reset the modem
as if you power cycled the unit. You may need to reset the Telephony Modem if you
are having problems connecting to the Internet. Using this button will be rare.
Use a pointed non-metallic object to press this button. The photo to the left shows
the location of the Reset button. The Reset button is recessed to prevent acci-
Cable
dental resets.
Model TM902S only: The rear panel power switch can also be used to power cycle
the unit.
Power Switch
Cable
Touchstone TM902 Telephony Modem User's Guide
Ethernet
Configuration Usage Troubleshooting Glossary
41