1.
Unbolt pallet from appliance using a 7/16" wrench to remove the two bolts from the
underside of the pallet.
2.
Logs, twigs, brick refractory, glowing embers, touch-up paint, tee handle, and this owner's
manual are shipped in the firebox for security in shipping.
3. Appliance door is sold and packaged in its own box.
1.
To gain access to gas valve, cut wire ties (shown below).
2.
Bottom grill hinges down; stove controls will then be visible.
3.
See Operation Controls on page 22 for information on using the controls to operate the stove.
January 2000
Grand Bay 40 Gas Freestanding
UNPACKING THE STOVE
GAS VALVE LOCATION
Page 11