Auger Engagement - Cornelius 500 Series Installation Manual

Figure 9. Schematic and Wiring Diagram WCC2001-R and WCF2201-R
A E
UGER NGAGEMENT
Be certain that auger is fully engaged to lower drive and extruder head is fully engaged into evaporator. Perform the
following procedure to engage the auger properly.
1. Install the extruder head on top of the evaporator, as shown in Figure 10.
2. When the auger is lowered into the evaporator, rotate the auger to engage the motor drive shaft, as shown in
Figure 11.
© 2004-2014, Cornelius Inc.
Continuous Flow Icemaker Installation Manual
Figure 10. .
- 11 -
Auger/
Extruder
Head
Publication Number: 630460174INS