Olivetti ECR 8220 S User Manual page 44

Menu Item Description
Popup List
The cash register has four [POPUP LIST x] keys for sales functions:
Function
A fifth key, [POPUP LIST 5], is available and can be mapped onto a key if required.
In Registration mode, when one of the [POP-UP LIST] keys is pressed, a list of operations is
displayed allowing you to select one to execute.
From Popup List Function, you can reprogram the operations displayed in the list by
specifying the operations for each list. When you select this option, the programming for
[POP-UP LIST1] is displayed first. To display the next [POP-UP LIST x] press
The form displayed contains a list of all the sales functions that can be programmed for the pop-
up list. Those indicated as YES are those currently displayed in the list, those indicated as NO are
not. You can change the settings by specifying YES for each operation to include in the list.
Set RESTORE DEFAULT to YES to restore the default settings for the pop-up lists at any time.
Chain Functions You can associate a 5-key sequence with each of the chain functions from [CHAIN
FUNCTION1] to [CHAIN FUNCTION5] to simplify and speed up the entry of repetitive cash
register operations. As the [CHAIN FUNCTIONx] keys are not provided by default on the
keyboard, you must first of all map the key you want to use onto a key as described in Free
Key Layout above. You can then program the key sequence that must be executed whenever
the [CHAIN FUNCTIONx] key is pressed. How to do this is explained by means of an example
below.
Example: Let's assume that [CHAIN FUNCTION1] is mapped onto the key
a cash payment of £10.00 every time this key is pressed:
1. Select
2. Press
3. Enter the key sequence by pressing:
4. Press
While programming a chain function, the keys
Chain Report You can program 5 chain reports. For each report, you can select the entities to be included by
changing their values from NO to YES for: Department & Financial, Department Group, All
PLUs, Sales Clerk, Training Clerk, Hourly Report, Training, Dept & Financial Grand Total, Full EJ.
Manager See below.
Password
30
Programming Mode -> Configuration Setup -> Advanced settings -> Chain Functions .
.
.
again
NOTE: The [CHAIN FUNCTIONx ] keys themselves cannot be used in a chain function,
nor can the following:
, , , , , , , ,
and
, ,
,
.
. To register
.
, ,
cannot be used.
.