Safety Precautions; Shipping And Storage; Mounting In Or On A Counter - Cornelius 500 Series Installation And Service Manual

S P
AFETY RECAUTIONS
This unit has been specifically designed to provide protection against personal injury. To ensure continued protection
observe the following:
!
WARNING:
Disconnect power to the unit before servicing following all lock out/tag out procedures established by the user. Verify
all of the power is off to the unit before any work is performed.
Failure to disconnect the power could result in serious injury, death or equipment damage.
!
CAUTION:
Always be sure to keep area around the unit clean and free of clutter. Failure to keep this area clean may result in
injury or equipment damage.
S A S
HIPPING ND TORAGE
!
CAUTION:
Before shipping, storing, or relocating the unit, the unit must be sanitized and all sanitizing solution must be drained
from the system. A freezing ambient environment will cause residual sanitizing solution or water remaining inside the
unit to freeze resulting in damage to internal components.
M
OUNTING IN OR ON A
!
WARNING:
When installing the unit in or on a counter top, the counter must be able to support a weight in excess of 500 - 169lbs,
700 - 179lbs, 1000 - 231lbs and 2000 - 376lbs. to insure adequate support for the unit.
Failure to Comply Could Result in Serious Injury, Death or Equipment Damage.
NOTE: Many units incorporate the use of additional equipment such as icemakers. When any
addition equipment is used you must check with the equipment manufacturer to determine the
additional weight the counter will need to support to ensure a safe installation.
!
CAUTION:
Very high discharges pressure is present in system. Quick disconnects on your gages will minimize danger and loss
of refrigerant.
!
CAUTION:
Unit requires separate electrical line. See instruction manual for proper fuse size.
!
WARNING:
There must be adequate clearance around icemaker. Allow minimum 6" air intake and 4" air exhaust for air exhaust
and panel removal.
NOTE: Unit must be installed per local plumbing and electrical codes. See installation manual for
unit requirements. Failure to do so may cause damage to unit, which would void unit warranty.
NOTE: Using any parts other than genuine factory manufactured parts relieves the manufacturer
of all liability.
NOTE: Manufacturer reserves the right to change specifications at any time.
© 2002-2014, Cornelius Inc.
C
OUNTER
- 2 -
Continuous Flow Icemaker Installation and Service Manual
Publication Number: 638085278