Safety Precautions; General Description; Table 1. Specifications - Cornelius D100 Installation Manual

Ice dispenser

Hide thumbs Also See for D100:

Specifications (20 pages)

Table Of Contents

Table of Contents

ALWAYS: Disconnect power to the dispenser before servicing or cleaning.

NEVER: Place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator

rotation occurs automatically when the dispenser is energized!

This ice dispenser has been specifically designed to provide protection against personal injury and eliminates

contamination of ice. To ensure continued protection and sanitation, observe the following:

ALWAYS: Be sure the removable lid is properly installed to prevent unautho-

rized access to the hopper interior and possible contamination of ice.

ALWAYS: Be sure the upper and lower front panels are securely fastened.

ALWAYS: Keep area around the dispenser clean of ice cubes.

CAUTION: Dispenser cannot be used with crushed or flaked ice.

Use of bagged ice, which has frozen into large chunks, can void warranty. The dispenser

agitator is not designed to be an ice crusher. Use of large chunks of ice which "jam up"

inside the hopper will cause failure of the agitator motor and damage to the hopper. If bagged ice

is used, it must be carefully and completely broken into small, cube-sized pieces before filling into

the dispenser hopper.

The D150 ice dispensers solve your ice and beverage service needs in sanitary, space saving, economical

ways. Designed to be manually filled with ice from any remote ice-making source, these dispensers will dis-

pense cubes (up to 1-1/4? in size), cubelets and hard-chipped or cracked ice.

Model:

D100

Ice Storage:

100 lbs.

Electrical:

120/1/60 3 Amp

Drain

3/4? FPT

Connection:

Electrical

6' , 3-Wire Cord with 3-Prong Ground

Connection:

Type Plug

Dimensions:

22? W x 29-3/4? D x 30-1/2? H