Table of Contents
Advertisement
Always disconnect power to the dispenser before servicing or cleaning.
Never place hands inside of hopper or gate area without disconnecting power to the dispenser. Agitator rotation
occurs automatically when dispenser is energized!
This ice dispenser has been specifically designed to provide protection against personal injury and eliminates
contamination of ice. To ensure continued protection and sanitation, observe the following:
ALWAYS be sure the removable lid is properly installed to prevent unauthorized access to the hopper
interior and possible contamination of the ice.
ALWAYS be sure the upper and lower front panels are securely fastened.
ALWAYS keep area around the dispenser clean of ice cubes.
CAUTION: Dispenser cannot be used with crushed or flaked ice. Use of bagged ice, which
has frozen into large chunks, can void warranty. The dispenser agitator is not designed to
be an ice crusher. Use of large chunks of ice which "jam up" inside the hopper will cause
failure of the agitator motor and damage to the hopper. If bagged ice is used, it must be carefully
and completely broken into small, cube-sized pieces before filling into the dispenser hopper.
The D3030-1 ice dispensers solve your ice and beverage service needs in a sanitary space saving, economical
way. Designed to be manually filled with ice from any remote ice-making source, these dispensers will dispense
cubes (up to 1-1/4? in size), cubelets and hard-chipped or cracked ice.
Model:
Ice Storage:
Electrical:
Drain Connection:
Electrical Connection
Dimensions:
SAFETY PRECAUTIONS
GENERAL DESCRIPTION
Table 1. Specifications
D3030-1
150 lbs.
120/1/60, 3 Amp
3/4? FPT
6' , 3-wire Cord with 3-Prong Ground Type Plug
30? w X 30? D x 34-1/2?
1
91718
Advertisement
Table of Contents
