Alarm Search - Sanyo DSR-3716 Instruction Manual

e00_l8hbg_us_7.book Page 31 Thursday, November 25, 2004 1:44 PM
5 SEARCHING FOR RECORDED VIDEO

Alarm search

Use the following procedure to search and playback all
video stored in the alarm recording area. If pre-alarm video
is being recorded, playback will start from immediately
before the alarm.
1
Press the [SEARCH] button while the
digital video recorder is recording or
stopped.
The SEARCH indicator lights up and the <SEARCH>
screen is displayed.
SEARCH
2
Turn the jog dial to select "ALARM
SEARCH", and then turn the shuttle dial
clockwise.
The <ALARM SEARCH> screen is displayed.
The eight most-recent alarm recordings are displayed.
(1)
NO
0016 01-05 09:53 1
0015 01-05 09:53 1
0014 01-05 09:53 1
0013 01-05 09:53 1
0012 01-05 09:52 1
0011 01-05 09:51 1
0010 01-05 09:51 1
0009 01-05 03:10 1
(1) NO:
Indicates the alarm number.
(2) DATE/TIME:
Indicates the date and time at which the alarm video
was recorded.
(3) CH:
Indicates the alarm video's channel (or camera
number).
(4) TOTAL ALARMS:
Indicates the total number of alarm video recordings.
(5) Preview:
Displays the selected alarm video.
English
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
(2) (3) (4)
<ALARM SEARCH>
DATE TIME CH TOTAL ALARMS
00016
(5)
MOVE:JOG SELECT:SHUTTLE
3
Turn the jog dial to select the video for
playback.
A preview of the selected alarm video is displayed in the
preview screen. In this case, the video from the instant of
alarm occurrence is displayed.
To display the next or previous recording
Turn the jog dial clockwise or counter-clockwise accordingly.
To leave search mode
Press the [SEARCH] button. SEARCH indicator turns off.
4
Turn the shuttle dial clockwise.
The selected recording is played back in full screen mode.
To view pre-alarm video
After beginning playback of an alarm recording identified by
an alarm search, use the shuttle dial to reverse playback.
To view alarm video before or after the current
playback
1
Press the appropriate [ALARM] button
during playback.
ALARM
Each time the " " button is pressed, playback will
skip to the preceding alarm video recording.
Each time the " " button is pressed, playback will
skip to the subsequent alarm video recording.
When playback is performed after an alarm search, the frame
at the start and end of each alarm recording will be paused.
Press the appropriate [ALARM] button to play the
previous or next alarm recording.
You can use the front-panel buttons, the shuttle dial, and the
jog dial to perform operations such as pause and fast-forward.
31
01-01-04 00:00:00 EN A ALARM 0000
02
01-01-04 00:00:00 EN A ALARM 0000
02