Sanyo DSR-3716 Instruction Manual page 100

e00_l8hbg_us_7.book Page 99 Thursday, November 25, 2004 1:44 PM
4 GENERAL SET
Operating dome cameras with the digital video
recorder
[FUNC.] button
3 4
5 6
1
Press the [FUNC.] button.
The FUNC. indicator lights up and camera control mode is
activated.
FUNC.
2
The buttons on the digital video
recorder operate the dome cameras as
follows.
In camera control mode the indicator lights up for all the
following.
Button name in
Button
normal mode
[MENU]
1 [MENU] button
button
[ENTER] [EXIT/OSD]
2
button button
[PRESET]
3 [QUAD] button
button
[AUTO PAN] [MULTI]
4
button button
[SEQUENC
[MON2]
5 E]
button
button
[TOUR]
6 [PLUS] button
button
[AF] [PLAY/STOP]
7
button button
English
1 2 7 8 11
CARD CARD
MENU
RESET
EJECT
9 10 12
Operation
Displays camera internal
menu screen.
Selects in camera internal
menu screen.
Switches to preset access
mode (indicator flashes).
Press [CAMERA SELECT]
button to move the camera
to preset position and
disable preset access mode
(indicator remains lit).
Starts automatic panning.
Perform another operation
to stop automatic panning.
Starts automatic camera
selection.
Perform another operation
to stop automatic camera
selection.
Starts TOUR.
Perform another operation
to stop TOUR.
Use one-push auto-focus.
Button name in
Button
normal mode
[IRIS]
8 [STILL] button
button
[FOCUS] [SHUTTLE
9
button HOLD] button
[ZOOM/
[ALARM]
10 INFO]
button
button
11 PAN Shuttle dial
12 TILT Jog dial
Finishing dome camera operation
3
Press the [FUNC.] button
The FUNC. indicator turns off and the unit returns to
normal mode.
In the following cases, when [FUNC.] button is pressed,
camera control mode does not start.
When displaying menu, search menu
During playback (including when paused or
displaying copy menu)
When in quad screen display, multi screen display (9
screens/ 16 screens), or plus screen display
When zooming
When displaying automatic selection
When displaying monitor 2
When PRESET, IRIS or FOCUS indicator is flashing
(during operation) and another button is pressed, the
operation is cancelled.
[REC/STOP][TIMER] buttons perform the same
operation as in normal mode.
In the following cases, camera control mode is
automatically disabled.
When no operation is performed for two minutes
When the alarm activates
99
Operation
Switches to iris adjust mode
(indicator flashes).
Press [ZOOM/INFO ] button
to close iris and [ZOOM/
INFO ] to open iris.
Press again to disable iris
adjust mode (indicator
remains lit).
Switches to focus adjust
mode (indicator flashes).
Press [ZOOM/INFO ]
button to focus on nearby
objects and [ZOOM/
INFO ] to focus on far-off
objects.
Press again to disable focus
adjust mode (indicator
remains lit).
Press [ZOOM/INFO ] to
reduce screen.
Press [ZOOM/INFO ] to
enlarge screen.
Use for operation when in
iris adjust mode and focus
adjust mode.
Pans faster the larger the
arc, and slower the smaller
the arc.
Turn to the right to tilt up
and to the left to tilt down.