Alarm Search - Sanyo SRT-7168P Instruction Manual

ALARM RECORDING

Alarm Search

To go to the beginning of a desired alarm recording.
1
Press the SEARCH button during stop mode.
ø "AL SEARCH 01" will be displayed on screen.
2
Press the REC/PLAY SPEED l (or j) button to set
the desired alarm number (1 to 99), then turn the
SHUTTLE ring clockwise (or counterclockwise).
ø The desired alarm is searched and a still
image of the beginning of the alarm recording
will appear on-screen.
NOTE:
œ The alarm number is relative to the actual tape
position. (Please refer to the illustration below.)
Alarm number 2
Alarm trigger input point
Rewind direction
3
Press the PLAY button.
ø Playback will start.
Playback
1 1 2
Fast-forward direction
Actual position
Alarm Scan
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1
Press the SEARCH button twice during stop mode.
ø "AL SCAN" will be displayed on screen.
2
Turn the SHUTTLE ring clockwise (or
counterclockwise).
ø The unit will advance (or rewind) the tape at
high speed and playback the first 5 seconds of
every alarm recording.
ø To cancel the alarm scan mode, press the
STOP button.
3
While the desired recording is being played back,
press the PLAY button.
ø Playback will start, alarm scan mode is
cancelled.
20
English