Sanyo DSR-3716 Instruction Manual page 10

e00_l8hbg_us_7.book Page 9 Thursday, November 25, 2004 1:44 PM
2 NAMES AND FUNCTIONS OF PARTS
DSR-3716
1
2
POWER FULL
1 2
27
AUDIO
OUT
28
9 10
29
USB
22. [TIMER] button and indicator ( P.23)
If the [TIMER] button is pressed while the recording is
stopped, timer recording standby mode is adopted and
recording will then start automatically at the set time. The
indicator will be lit up while in timer recording standby
mode or timer recording.
If the button is pressed during timer recording, this process
is stopped and the indicator turns off. Furthermore, if the
[TIMER] button is pressed when in timer recording standby
mode, indicator is turned off and timer recording is
cancelled.
23. [ALARM] buttons ( P.31)
When an [ALARM] button is pressed during playback or
still, the digital video recorder skips to the next earlier or
next later alarm.
24. Jog dial (inside) and shuttle dial (outside)
During playback:
Use the jog dial to change the playback speed.
Use the shuttle dial to perform fast-forward or fast-
reverse playback.
During menu display:
Use the jog dial to move the cursor and to change
setting values. Use the shuttle dial to confirm settings.
25. CompactFlash card slot ( P.41)
This slot is used to house a CompactFlash card or Microdrive.
26. [MENU RESET] button ( P.48)
The [MENU RESET] button is used to default menu
settings.
When setting motion sensors, furthermore, all sensors on
the same line as the cursor can be turned on
simultaneously by pressing this button.
27. Audio output terminal
Audio output is the same as that of the rear panel AUDIO
OUT terminal.
English
3 4 5
ALARM FULL LOCK ALARM
3 4 5 6 7 8
12 13
11 14 15 16
6
9
8 7 12 13 14
15 16 17
MENU EXIT/OSD PLAY/STOP
MENU ENTER AF
ZOOM SEARCH STILL
FUNC.
QUAD MULTI
IRIS
SEQUENCE COPY SHUTTLE HOLD
PRESET AUTO PAN
MON 2 PLUS
FOCUS
REC/STOP TIMER ALARM
SEQUENCE TOUR
ZOOM/I/FO
18 19
10 11 21 22 23 20
28. Video output terminal
This terminal outputs the same video as that of the MAIN
MONITOR output terminal on the rear panel.
29. USB terminal ( P.45)
This terminal connects to a recordable CD-R/RW drive.
The USB terminal is for the use of the recommended
Sanyo CD-R/RW drive (sold separately). Non-
recommended peripherals cannot be connected.
For recommended recordable drives, check the Sanyo
homepage or ask at your local Sanyo dealer.
Sanyo website URL:
http://www.sanyosecurity.com
9
24
SHUTTLE
JOG
25
CARD
MENU MENU
26
RESET
EJECT
PAN