Erasing Tracks (Only For Cd-Rw) -Track Erase; Erasing All Tracks (Only For Cd-Rw) -Disc Erase - JVC XL-R5020BK Instructions Manual

On the unit:
XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER
COMPACT
DIGITAL AUDIO
7 7 7 7 7 Erasing tracks (only for CD-RW)—Track Erase
Before finalizing a disc, you can erase recorded tracks—from
a selected track up to the last track—on a CD-RW at a time.
• To erase recorded tracks on a finalized CD-RW, unfinalize
the disc first (see page 34).
IMPORTANT
• Once erasure is performed, erased data cannot be
restored.
• When you unplug the power cord or when a power failure
occurs while "ERASE TRACK" is flashing on the display,
the disc may not be utilized any more.
1
Load an unfinalized disc on the CD Recorder
disc tray.
The total recorded track numbers and total playing time
are shown on the display.
2
While 3-CD Changer and CD Recorder are in stop
mode, press MENU.
3
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control until "TRACK ERASE"
appears on the display, then press SET.
The following message appears on the display.
• To cancel the erasing, press CANCEL.
Erasing from this
track number
4
Turn MULTI JOG ¢ / 4 on the unit or press
cursor 3 or 2 on the remote control to select
erasure start track, then press SET.
All the tracks between the selected track and the last one
are erased.
• The erased track numbers go off from the track
numbers indicators on the display.
Skip-marked tracks can also be erased.
36
MULTI JOG
CD Recorder
¢ / 4
disc tray
COMPACT
DIGITAL AUDIO
Recordable
ReWritable
CANCEL
MENU SET
Last recorded
track number
Remote control:
3 / 2
7 7 7 7 7 Erasing all tracks (only for CD-RW)—Disc Erase
You can erase all the recorded tracks—whether or not
finalized—on a CD-RW at a time.
IMPORTANT
• Once erasure is performed, erased data cannot be
restored.
• When you unplug the power cord or when a power failure
occurs while "ERASE DISC" is flashing on the display, the
disc may not be utilized any more.
1
Load a recorded disc on the CD Recorder disc
tray.
The all recorded track numbers and total playing time are
shown on the display.
2
While 3-CD Changer and CD Recorder are in stop
mode, press MENU.
3
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control until "DISC ERASE"
appears on the display, then press SET.
"ERASE DISC?" appears on the display.
• To cancel the setting, press CANCEL.
4
Press SET again.
The erasure starts. The REC indicator lights up, and the 3
indicator and "ERASE DISC" start flashing on the display.
• Erasure requires a few minutes to complete. When
erasure is done, "BLANK DISC" appears on the display.
1 2 3
4 5 6
7 8 9
10 10
GROUP
CONTROL
PLAY
MODE REPEAT CD CDR
MENU
GROUP
SET
SET
CANCEL
GROUP
CD REC CD EDIT SYNCHRO FADE
REC FINALIZE PITCH 0