JVC XL-R5020BK Instructions Manual page 10

To connect digital components
This unit is equipped with two types of digital input/output
terminals—coaxial and optical.
When connecting a digital component equipped with a
digital output terminal
The following connection allows you to perform digital-to-
digital recording on this unit (through the digital terminals).
Audio component with
digital output
To optical
To coaxial
digital output
digital output
Digital coaxial Digital optical
cable cable
(not supplied) (not supplied)
COMPU LINK-4
DIGITAL IN DIGITAL OUT
(SYNCHRO)
COAXIAL OPTICAL COAXIAL
MODE
CDR TD
• When playing back an MP3 disc, digital signal cannot be output
from this unit. Connect also this unit to LINE OUT (PLAY) jacks by
using audio cords with RCA pin plugs (supplied).
• Digital signal cannot be output through the DIGITAL OUT terminals
while recording digitally from an external component.
8
Before connecting
digital optical cable,
remove the protective
cover from the terminal.
Protective plug
OPTICAL
When connecting a digital component equipped with a
digital input terminal
The following connection allows you to perform digital-to-
digital recording (from 3-CD Changer onto the other
component).
COMPU LINK-4
DIGITAL IN DIGITAL OUT
(SYNCHRO)
COAXIAL OPTICAL COAXIAL
MODE
CDR TD
Digital coaxial
cable
(not supplied)
To coaxial
digital input
Audio component with
When this unit cannot recognize a component connected to the
DIGITAL IN COAXIAL or OPTICAL terminal, "UNLOCK" appears on
the display. If this happens, press PLAY 3 for 3-CD Changer so that
the connected component will be recognized.
NOW, you can plug in the unit and other connected
components FINALLY!
LINK-4
DIGITAL IN DIGITAL OUT
CHRO)
COAXIAL OPTICAL COAXIAL OPTICAL
Before connecting
digital optical cable,
remove the protective
cover from the terminal.
Protective plug
OPTICAL
Digital optical
cable
(not supplied)
To optical
digital input
digital input
To a wall outlet