Using The Timer; Setting The Clock - JVC XL-R5020BK Instructions Manual

Using the Timer

• Before using the timers—Daily Timer and Once Timer, you need to set the clock built in the unit.
On the unit:
STANDBY/ON
XL – R5020 CD/CDR MULTIPLE COMPACT DISC RECORDER
MIN MAX

Setting the Clock

You can set the clock whether the unit is turned on or off (on
standby).
To set the clock first time
1
When the unit is in standby mode
1) Press MENU.
"CLOCK SET" appears on the display.
2) Press SET.
When the unit is turned on
1) Press MENU.
2) Turn MULTI JOG ¢ / 4 on the unit or press
3 or 2 on the remote control to select
"CLOCK/TIMER" then press SET.
The hour digit on the display starts flashing.
2
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control to adjust the hour,
then press SET.
The minute digit on the display starts flashing.
• To correct the hour after pressing SET, press CANCEL.
The hour digit starts flashing again.
3
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control to adjust the minute,
then press SET.
The built-in clock starts working.
COMPACT COMPACT
DIGITAL AUDIO
DIGITAL AUDIO
Recordable
ReWritable
SET
MENU
Remote control:
MULTI JOG
¢ / 4
3 / 2
CANCEL
To adjust the clock again
You can adjust the clock whether the unit is turned on or off
(on standby).
1
While 3-CD Changer and CD Recorder are in stop
mode or the unit is in standby mode, press
MENU.
2
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control to select "CLOCK/
TIMER" then press SET.
3
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control to select "CLOCK
SET" then press SET.
The hour digit on the display starts flashing.
4
Set the clock according to the procedure of the
steps 2 and 3 on the left.
When you unplug the AC power cord or if a power failure occurs,
the clock will be reset to "AM 12:00" and the timer memory will be
erased. If this happens set the clock and the timer again.
STANDBY/ON
STANDBY/ON
CD1 CD2 CD3
1 2 3
4 5 6
7 8 9
10 10
GROUP
CONTROL
PLAY
MODE REPEAT CD CDR
MENU
GROUP
SET
SET
GROUP
CANCEL
37