JVC XL-R5020BK Instructions Manual page 25

To stop recording for a moment, press PAUSE 8 for CD
Recorder on the unit or 8 on the remote control. To resume
recording, press PLAY 3 for CD Recorder on the unit or 3 on
the remote control. (A track mark is recorded when you
resume recording.)
To stop recording, press STOP 7 for CD Recorder on the
unit or 7 on the remote control.
To eject the disc, press EJECT 0.
"FINALIZE ?" appears on the display.
—To finalize, press FINALIZE or SET. After finalizing, the disc
is ejected.
—Not to finalize, press EJECT 0 again or wait for 5 seconds
so that the disc comes out without being finalized.
• If "UNLOCK" appears on the display when selecting "OPTICAL IN"
or "COAXIAL IN," digital component connected to the DIGITAL IN
terminals is not recognized. Check the connection (see page 8).
• When selecting "CD DIGITAL" as the recording source with Pitch
Control activated (see page 15), the recording source is
automatically changed to "CD ANALOG."
To adjust the analog recording level
You can adjust the recording level when recording from an
external component connected to the LINE IN jacks.
• When you record through the microphone, you can also
adjust the recording level.
On the unit:
0 CD/CDR MULTIPLE COMPACT DISC RECORDER
OMPACT
AL AUDIO
Remote control:
7
10
PLAY
MODE REPEAT
3/2
CD REC CD EDIT SYNCHRO
REC LEVEL +/−
COMPACT
DIGITAL AUDIO
Recordable
ReWritable
MENU SET
8 9
10
GROUP
CONTROL
CD CDR
MENU
GROUP
SET
SET
GROUP
FADE
1
While CD Recorder is in recording pause mode
(or recording), press MENU.
2
Turn REC LEVEL +/− control on the unit or press
3 or 2 on the remote control to adjust the
recording level.
• Adjust the recording level so that the OVER indicator
never lights. If the OVER indicator lights up in red
intermittently, the recorded sound will be distorted.
3
1 2 3 4 5
6 7
2
1
• You can adjust the recording level within the range of
–68 dB to +12 dB. Normally set it to 0 dB (initial
setting).
3
Press SET or MENU to finish the adjustment.
• Recording level adjustment is stored until the recording
source is changed.
When you unplug the AC power cord or if a power failure occurs
recording level adjustment will be erased. If this happens, adjust the
recording level again.
OVER
ANALOG CD RECORDER
REC
OVER
CD-R
indicator
L
44.1kHz
40 30 20 15 10 6 3 0 dB
R
23