Preparing For Cd Synchronized Recording; Changing The Recording Speed; Finalizing Discs Automatically - JVC XL-R5020BK Instructions Manual

Preparing for CD Synchronized Recording

The following four methods are available when recording from discs in 3-CD Changer onto a CD-R or CD-RW in CD Recorder.
Disc Direct Recording—Records a disc in 3-CD Changer (see page 26).
One Track Recording—Records a track of a disc in 3-CD Changer (see page 28).
Listening Edit Recording—Records only tracks you select while playing back discs in 3-CD Changer (see page 29).
Program Edit Recording—Records tracks you program from discs in 3-CD Changer (see page 30).
When using these CD Synchronized Recording, you can set the following settings before recording if necessary.
On the unit:
0 CD/CDR MULTIPLE COMPACT DISC RECORDER
OMPACT
AL AUDIO

7 7 7 7 7 Changing the recording speed

The speed of digital recording on a CD-R and CD-RW is initially
set to high speed—4 times normal speed for CD-Rs and 2 times
for CD-RWs. (The HIGH SPEED indicator lights up on the
display.) You cannot listen playback sound while recording.
To change the setting to normal speed follow the procedure
below.
• When analog recording is performed, the recording speed
is fixed to normal speed.
Available recording methods
Disc Direct Recording, One Track Recording, Listening Edit
Recording, Program Edit Recording
1
While 3-CD Changer and CD Recorder are in stop
mode, press MENU.
2
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control until "DUB-SPEED"
appears on the display, then press SET.
"SPEED HIGH" (initial setting) appears on the display.
• To cancel the setting, press CANCEL.
3
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control to select "SPEED 1X,"
then press SET.
To set to the high speed again, select "SPEED HIGH" in
step 3. The HIGH SPEED indicator lights up on the display.
MULTI JOG ¢ / 4
COMPACT
DIGITAL AUDIO
Recordable
ReWritable
CANCEL
MENU SET
Remote control:
7
10
PLAY
MODE REPEAT
GROUP
SET
3 / 2
GROUP
CD REC CD EDIT SYNCHRO FADE

7 7 7 7 7 Finalizing discs automatically

CD-R and CD-RW are not finalized automatically when
performing Listening Edit Recording and Program Edit
Recording, since they are expected further additional
recordings. To finalize a disc automatically after these
recordings are performed, follow the procedure below.
Available recording methods
Disc Direct Recording, Listening Edit Recording,
Program Edit Recording
1
While 3-CD Changer and CD Recorder are in stop
mode, press MENU.
2
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control until "AUTO FINALIZE"
appears on the display, then press SET.
"FINALIZE OFF" (initial setting) appears on the display.
• To cancel the setting, press CANCEL.
3
Turn MULTI JOG ¢ / 4 on the unit or press 3
or 2 on the remote control to select "FINALIZE
ON," then press SET.
How this function actually works?
When you start one of the recording methods—Disc
Direct Recording, Listening Edit Recording and Program
Edit Recording, "ADD FINALIZE?" appears.
—To finalize the disc after recording is done, press SET.
—Not to finalize the disc, press CANCEL.
• If you do not press any button within 5 seconds,
recording will start automatically. After recording is over,
the disc will be finalized.
To turn off the automatic finalization, select "FINALIZE
OFF" in step 3.
Finalization is not performed when the recording is stopped manually.
8 9
10
GROUP
CONTROL
CD CDR
MENU
SET
CANCEL
25