Message - JVC XL-R5020BK Instructions Manual

Message

Message
ALL SKIP TR Skip marks are recorded to all the tracks.
ALREADY FINAL You are trying to record on a finalized disc.
ALREADY UNFIN. You are trying to unfinalize an unfinalized disc.
BLANK DISC No track is recorded on the loaded disc.
CANNOT ERASE Loaded CD-RW disc is damaged. Erasure on this disc is
impossible.
CANNOT FIN. Loaded disc is damaged. Finalization on this disc is impossible.
CANNOT PLAY On 3-CD Changer, damaged disc is loaded or an MP3 disc is
detected during Program Play and Random Play.
CANNOT REC Recording on this disc is impossible due to the disc type—for
example, an MP3 disc, and to incorrect connection.
CANNOT UNFIN. Loaded CD-RW disc is damaged. Unfinalization on this disc
is impossible.
CDR DISC NG Loaded CD-R is damaged.
DAO DISC You are trying to unfinalize a CD-RW which has been
recorded using the "Disc At Once" recording system.
DISC FULL You are trying to record on a fully recorded CD-R or CD-RW.
NOT AUDIO IN Incoming digital signal from the external component is not of
an audio format.
NOT REC MUTE You are trying to use the REC MUTE button during
Synchronized Recording.
NO AUDIO DISC Loaded disc is not an audio disc or an MP3 disc.
NO RW DISC You are trying to perform one of the functions for a CD or
CD-R which is only possible on a CD-RW.
NO R/RW DISC You are trying to perform one of the functions for a CD which
is only possible on a CD-R or CD-RW.
OPC ERROR OPC cannot be performed. No recording or erasure can be
performed on this disc.
OPC FULL OPC is full. No recording or erasure can be performed on this
disc.
PMA FULL PMA is full. No recording or erasure can be performed on this
disc.
SCMS PROTECT Digital recording is prohibited in accordance with SCMS
regulations.
SHORT REMAIN The remaining time on a disc is shorter than the playing time
of the track you are trying to record.
SKIP FULL 21 skip marks are already recorded.
TNO FULL 99 tracks have been recorded. No further recording is possible.
TRAY LOCKED You are trying to eject a disc while Tray Lock is in use.
UNLOCK The external digital component is not connected properly or
is turned off, or its signals are incompatible.
UPDATE OPC OPC is being performed before recording, when a disc is just
inserted in CD Recorder.
Signification Solution
Replace the disc.
Replace the disc.
Replace the disc.
Check the disc or connection.
Replace the disc.
Replace the disc.
Replace the disc.
Replace the disc.
Check the source played on the external
component connected to the DIGITAL IN
terminals.
You can only use the REC MUTE button
during Standard Recording.
Replace the disc.
Load a CD-RW.
Load a CD-R or CD-RW.
Replace the disc.
Replace the disc.
Replace the disc.
See "SCMS" on page 42.
To record skip marks, delete skip-
marked tracks first. See page 35.
To record other tracks, delete unwanted
tracks first (CD-RW only).
Unlock Tray Lock (see page 15).
Check the connection, or playback
source.
This is normal. After OPC is correctly
done, recording starts.
43