Setting The Clock; Setting The Present Time - JVC XL-R5000BK Instructions Manual

Setting the Clock

Setting the Present Time

(To be performed when the unit is to be used for the first time)
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
1 CANCEL 2,3
Example: Setting the time to 1:15 PM (while the
power is switched to STANDBY).
This unit uses a 12-hour clock to indicate the time.
1
Press the CLOCK/TIMER button.
• The time display is illuminated, and the "hour" indicators starts
flashing.
CLOCK/
TIMER
2
Turn the MULTI JOG dial to change the hour
display to "PM 1", and then press the SET
button.
• The hour display stops flashing, and the minute display starts to
flash.
MULTI JOG
To put back
To advance
the time
the time
Turn the MULTI JOG until
"PM 1:00" is displayted.
3
Turn the MULTI JOG dial to change the minute
display to "15", and then press the SET button.
MULTI JOG
To put back
To advance
the time
the time
Turn the MULTI JOG until
"PM 1:15" is displayted.
• The current time "1:15" is displayed and the display window
darkens.
33
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
2,3
(When the time is to be re-set,
the present time will flash.)
SET
Press the SET button. "PM
1:00" is then displayted.
SET
Press the SET button. "PM
1:15" is then displayted.
• If you made a mistake in entering the current time, repeat this
procedure from the beginning.
• If the CANCEL button is pressed while setting the "minute"
display, the flashing "hour" display is restored. This function
comes in handy for correcting the "hour" display.
To ascertain the correct time
In most areas, there is a telephone number you can call for the cor-
rect time, consult your telephone directory for assiastance.
To change or adjust the time display
It is possible to change the time even after it has been set. Press the
CLOCK/TIMER button repeatedly to select the time display, and
set the time as described in the procedure on this page. The time
can be adjusted even when the unit is in standby.
Function display
CLOCK/
TIMER
DAILY TIMER
ONCE TIMER
Present Time : Select this display and
Regarding the time display
• The time display for Canada and USA models uses a 12-hour
clock.
• Models for other countries use a 24-hour clock.
The illustrations in this Instruction Manual show the Canada and
USA model. For users of other models, please note that "AM" and
"PM" indications will not be displayed as shown in this manual.
Please refer to the illustrations below for differences in the two
time display types.
For Canada and USA
• The time display cannot be switched between the 12-hour and
24-hour clock display.
set the time.
For other countries