JVC XL-R5000BK Instructions Manual page 41

Notes
• Match the timer of the connected source with the unit's setting.
(In the case of the mic input, ensure that the microphone has
been connected to the unit.)
• Recording starts at the programmed start time, and the power
will be switched to STANDBY at the programmed end time.
When operation is completed once in the ONCE TIMER mode,
the timer programming is cleared.
• If digital signals are not supplied when timer recording has been
started with digital input signals, "UNLOCK" is displayed and
no signals will be recorded.
• When using the timer to record a digital satellite broadcast pro-
gram, for instance, check that the broadcast station with the
desired program can be tuned in correctly before programming
the timer start and end times.
36