Timer Operations; Timer Play (Wake-Up Play) - JVC XL-R5000BK Instructions Manual

Timer Operations

Timer Play (wake-up play)

Before proceeding with timer programming, make sure that the
present time has been set correctly. (See page 33.)
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
STANDBY
POWER
3 ~ 8,10
1,11 2
Example: Setting the unit to turn on and play a CD
from 7:15 AM to 8:15 AM.
1
Turn on the power.
• The selected function ("CD" at the time of purchase) is dis-
played.
2
Press CLOCK/TIMER repeatedly to select the
timer mode (DAILY TIMER or ONCE TIMER).
• The mode changes each time this button is pressed.
Function display
DAILY TIMER : The timer is activated every day.
ONCE TIMER : The timer is activated only once.
Present Time ("hour" display flashes.)
3
Press the SET button.
SET
4
Turn the MULTI JOG dial to set the hour display
to "AM 7", and press SET.
• The hour display stops flashing and the minute display starts to
flash.
MULTI JOG
To put back
To advance
the time
the time
1. Turn the MULTI JOG until
"AM 7:00" is displayed.
REC LEVEL
MIN MAX
MIX BALANCE PHONES LEVEL
MULTI JOG
– +
4 ~ 7,9
The start time flashes.
SET
2. Press the SET button. "AM
7:00" is then displayed.
5
Turn the MULTI JOG dial to change the minute
display to "15", and then press the SET button.
• The hour display of the timer stop time starts to flash.
MULTI JOG
To put back
To advance
the time
the time
3. Turn the MULTI JOG until
"AM 7:15" is displayed.
6
Turn the MULTI JOG dial to set the hour display
to "8", and press SET.
• The hour display stops flashing and the minute display starts to
flash.
MULTI JOG
To put back
To advance
the time
the time
1. Turn the MULTI JOG until
"AM 8:00" is displayed.
7
Turn the MULTI JOG dial to change the minute
display to "15", and then press the SET button.
• "PLAY" is displayed.
MULTI JOG
To put back
To advance
the time
the time
3. Turn the MULTI JOG until
"AM 8:15" is displayed.
When "Play" is displayed, it is necessary to set the Timer Play or
Timer Recording function.
For Timer Play and Timer Recording, see the procedure on the fol-
lowing page.
Note
• If the CANCEL button is pressed while setting the "minute"
display, the flashing "hour" display is restored. This function
comes in handy for correcting the "hour" display.
SET
4. Press the SET button. "OFF
AM 12:00" is then displayed.
The end time flashes.
SET
2. Press the SET button. "AM
8:00" is then displayed.
SET
4. Press the SET button.
"PLAY" is then displayed.
34