Run Circuit Test - Ford LSG 875 Service Manual

2-06
IGNITION SYSTEM
2-06
DIAGNOSIS AND TESTING (Continued)
TEST STEP
RESULT ACTION TO TAKE
2
RUN CIRCUIT
.
l Turn ignition switch from Off to Run to Off position Sparks INSPECT distributor cap,
several times.
adapter, rotor for cracks,
l Spark
should
occur each time switch goes from Run
carbon tracking, lack of
to Off position.
silicone compound.
l Remove spark tester, reconnect coil wire to
CHECK for roll pin
distributor cap.
securing armature to
sleeve in distributor.
CHECK that ORANGE
and PURPLE wires are
COAT COMPLETE SURFACE OF
not crossed between
ROTOR BLADE TIP WITH
distributor and ignition
SILICONE COMPOUND - 1132" THICK'
module.
No Sparks .GO to 3.
THIS SURFACE
I
*DO NOT USE SILICONE COMPOUND
A60273
ON MULTIPOINT ROTOR.
.
4