Ford LSG 875 Service Manual page 3

Introduction
In general, this manual covers the servicing of the engine and associated
standard equipment. In many cases, engines are supplied with accessories
and equipment that are unique to the application. If service information is
ever required on such unique accessories or equipment it is suggested that
the Power Products Operations of Ford Motor Company be contacted. The
proper information will either be forwarded or the Service Technician will be
advised where it can be obtained.
The information in this manual is grouped in sections according to the type of
work being performed. The various sections are indicated in the index. In
addition, each section is subdivided to include topics such as diagnosis and
testing, cleaning and inspection, overhaul, removal and installation pro-
cedures, disassembly and assembly procedures, and service
specifications.
GEOMETRIC
RESULTS
Power Products Division
Geometric Results incorporated
19855 W. Outer Drive
Dearborn, MI 48124
The descriptions and specifications contained in this manual were in effect at the time the
book was released for printing. Geometric Results incorporated reserves the right to
discontinue models at any time, or change specifications of design, without notice and
without incurring obligation.
NOTE: The
recommendations and suggestions contained
in
this publication are
made
to
assist the distributor in improving his distributorship parts and/or service department
operations. These recommendations and suggestions do not supersede or override the
provisions of the Warranty and Policy Manual and in any cases where there may be a
conflict, the provisions of the Warranty and Policy Manual shall govern.
Rev.
April, 1992