Table of Contents
Advertisement
1. U.S. and Canada Certification
The IB75 Gas Appliance has been tested in accordance
with the standards
, and has been listed by Underwriters Laboratories
Inc. for installation and operation as described in this
manual. All components are UL, AGA, CGA, or CSA
safety certified.
2. Local Codes
This installation must conform with local codes. In the
absence of local codes comply with the
and the
Canada.
If you need assistance during installation, please
contact your local dealer or Heatilator Technical
Services Department, Hearth & Home Technologies,
1915 W. Saunders Street, Mt. Pleasant, Iowa 52641,
1-800-927-6841.
HEATILATOR® is a registered trademark of Hearth &
Home Technologies Inc., Division HON INDUSTRIES.
C
a
Typical Installation Components
4
A. APPLIANCE SPECIFICATIONS
IB75 Nomenclature
a t
o l
g
#
D
e
s
c
i r
t p
o i
n
Note:
tained at all times. Illustrations throughout these instruc-
and
tions reflect typical installations and are for design pur-
poses only. Actual installation may vary slightly due to
individual design preferences.
The illustrations and diagrams used throughout these
installation instructions are not drawn to scale.
in the U.S.A.,
Saw
in
Pliers
Hammer
Phillips screwdriver
Tape measure
Plumb line
Level
Æ
Non-corrosive leak check solution
Note:
Commonwealth of Massachusetts. They are required.
35048 Rev L
IB75 B-VENT GAS APPLIANCE
Minimum and maximum clearances must be main-
Wall-finishing materials
Framing material
Surround
Caulking material
Safety gloves
Electric drill/bits
Framing Square
WARNING!
Glass doors are
optional in the
03/04
Advertisement
Table of Contents
