Appliance Specifications - Heatilator CALIBER DESIGNER B-VENT SERIES Installation And Operating Instructions Manual

1. U.S. and Canada Certification
The Caliber Designer B-Vent Series gas appliance
has been tested in accordance with the
current
has been LISTED by Underwriters Laboratories Inc.
for installation as described in this manual. All
components are UL or AGA safety certified.
2. Local Codes
This installation must conform with local Codes. In
the absence of local Codes comply with the
and the CAN
If you need assistance during installation contact your
local dealer or Heatilator Technical Services
Department, Hearth & Home Technologies Inc., 1915
W. Saunders Street, Mt. Pleasant, Iowa 52641,
1-800-927-6841.
HEATILATOR® is a registered trademark of Hearth &
Home Technologies Inc., a Division HON Industries.
3. Glass Certification and Specifications
Heatilator gas appliances manufactured with
tempered glass may be installed in hazardous
locations such as bathtub enclosures as defined by
the CPSC. The tempered glass has been tested and
certified to the requirements of
This statement is in compliance with
requirements” which refers to
“…Such certificate shall accompany the product or
shall otherwise be furnished to any distributor or
retailer to whom the product is delivered.”
Some local building codes require the use of tempered
glass with permanent marking in such locations.
Glass meeting this requirement is available from the
factory. Please contact your dealer or distributor to
order.
4
A. APPLIANCE SPECIFICATIONS
in Canada, the
in the U.S.A.,
in Canada.
“Certification and labeling
stating
33795 Rev i
CALIBER DESIGNER SERIES
and
WARNING!
01/04