Lumistep - Philips MultiOne User Manual

User Manual
Description
This feature provides an interface for easy dimming via pilot-line or external sensor
(presence) of a group of lamps. Dimming to desired level can be controlled by
applying a 230V between the DALI inputs. The fade times can also be set using the
fade on-, fade off and switch off delay time.
Usage
Select the Enable check box to use this feature. This feature has the following
parameters:
 High V level: Use the slider or the text field to select a value. The value
represents the light level to be set when high voltage is detected on the mains.
 Low V level: Use the slider or the text field to select a value. The value
represents light level to be set when low voltage is detected on the mains.
 Fade on time: Use the slider or the text field to select a value. The value
represents the fade on time to be used.
 Switch off delay time: Use the slider or the text field to select a value. The
value represents the switch off delay time to be used.
 Fade off time: Use the slider or the text field to select a value. The value
represents the fade off time to be used.
12.3.23

LumiStep

Product group
LED
Description
This feature provides a simplified version of Dynadimmer.
Usage
Select the Enable check box to use this feature. This feature has the following
parameters:
 Dim period: Use the drop down box to select the wanted dim period. This is
the time period the dim level will be used.
© Philips Lighting B.V. 2014
Philips MultiOne
Page 49 / 81