User Manual
Alternatively to using the sliders, some lines and points in the graph can be dragged
to adjust the configuration.
12.3.14
Dimming Interface
Product group
LED
Description
Use the Dimming Interface feature to select the dimming interface for the device. The
actual options are depending on the device model:
1-10 V
DALI
Dynadimmer
No dimming
AmpDim
LineSwitch
When DALI has been selected, an additional setting appears with which the dimming
behavior can be set. Options are Logarithmic and Linear dimming curves.
Usage
Use Dimming Interface to select the desired dimming interface.
Product group
FLUO, LED
Description
Use the Dimming Interface feature to select the dimming interface for the device.
Usage
The available dimming interfaces are stored in the device and therefore need to be
read out. When the interfaces are found it will be possible to select Automatic
selection (enable all interfaces), No dimming (disable all interfaces) or a single
interface.
© Philips Lighting B.V. 2014
Philips MultiOne
Page 41 / 81