Configuring Device Features - Philips MultiOne User Manual

User Manual

12.3 Configuring device features

You can configure all features that are supported by a specific Philips device. For any
device selected in the Network, the Device features tab displays the set of device
features that corresponds to this device. Upon selecting another device, the Device
features tab will be updated as well. This mechanism ensures that only the features
supported by the selected device can be configured.
The Device features tab has a panel with a column of tabs on the left-hand side.
Each feature has its own tab. For most devices a Summary tab is available as well.
To make sure that the feature information in the
Device features tab corresponds to the
selected device, click Read on the toolbar.
To make sure that the feature information is stored in the selected device, click Write
on the toolbar.
For both Read and Write status icons will be
shown when a feature is being read or written.
There are three different colors used for the icons:
red, green and grey. Red means that the reading
or writing has failed. The green icon indicates that
the reading was successful and that all the data
was sent to the driver. This does not mean that all
data is actually received (see Write and Verify in
chapter 21). The grey icon is used to display that
Write
© Philips Lighting B.V. 2014
Philips MultiOne
Read
Page 29 / 81