Lamp Burn-In; Lamp Selection - Philips MultiOne User Manual

User Manual
12.3.19

Lamp Burn-in

Product group
FLUO
Description
Lamp Burn-in prevents dimming below a predefined level in the first hours of a
lamp's life. This is to ensure that the lamp will be properly "burned in" before
dimming.
Usage
Select the Enable check box to use this feature. This feature has of two parameters:
 Burn-in level: use the slider or the text field to select a value. The value
represents the maximum arc power level for dimming (the label on the right
gives the approximate light level in percent). Alternatively, select the Use
default check box to use the default value.
 Burn-in time: use the slider or the text field to select a value. The value
represents the time in minutes during which the burn-in level is active.
Alternatively, select the Use default check box to use the default value.
12.3.20

Lamp Selection

Product group
HID, FLUO
Description
Use the Lamp Selection feature to select the lamp type that is connected to the
device. Options depend on the device model.
Usage
© Philips Lighting B.V. 2014
Philips MultiOne
Page 47 / 81