E/D Rtty Group; E/D Psk Group - Yaesu FT dx 1200 Operating Manual

m m
enu oDe
e/d rtty g
188 RX USOS
Function: Enables/Disables the RX USOS feature.
Available Values: ENABLE/DISABLE
Default Setting: ENABLE
189 TX USOS
Function: Enables/Disables the TX USOS feature.
Available Values: ENABLE/DISABLE
Default Setting: ENABLE
190 RX NEW LINE CODE
Function: Selects the command code used for the
Carriage Return during RTTY receive.
Available Values: CR,LF,CR+LF / CR+LF
Default Setting: CR,LF,CR+LF
191 TX AUTO CR+LF
Function: Enables/Disables the sending of the Carriage
Return (CR+LF) Code while transmitting in RTTY.
Available Values: ENABLE/DISABLE
Default Setting: ENABLE
192 TX DIDDLE
Function: Selects the transmission code when there is
not a character to be transmitted.
Available Values: OFF/BLANK/LTRS
Default Setting: BLANK
193 BAUDOT CODE
Function: Selects the Baudot Code used for the RTTY
mode.
Available Values: CCITT/US
Default Setting: US
Page 126
roup
e/d pSk g
194 PSK MODE
Function: Selects the operation mode of the PSK mode.
Available Values: BPSK/QPSK
Default Setting: BPSK
195 DECODE AFC RANGE
Function: Selects the operation range (or bandwidth) of
the AFC feature.
Available Values: 8/15/30
Default Setting: 15
196 QPSK POLARITY REV
Function: Selects normal or reverse phase shift for the
QPSK mode.
Available Values: RX-N, TX-N / RX-R, TX-N /
RX-N, TX-R / RX-R, TX-R
Default Setting: RX-N, TX-N
FT 1200 O
DX
roup
M
peraTing anual