Memory Groups; Choosing The Desired Memory Group - Yaesu FT dx 1200 Operating Manual

Hf/50 mhz transceiver
Hide thumbs Also See for FT dx 1200:
Table of Contents

Advertisement

m
o
emorY
Memory channels may be arranged into as many as six convenient groups, for easy identification and selection. For ex-
ample, you might want to designate memory groups for AM BC stations, short-wave broadcast stations, contest frequen-
cies, repeater frequencies and PMS limits, or any other groupings you like.
Each memory group is capable of holding up to 20 memory channels (except Memory Group 01: it is 19 memory chan-
nels, and the Group size is fixed). When a memory channel is grouped, the channel numbers change to correspond to the
chart below:
Memory Group Assignment
1. Press the [ MENU ] button to enter the Menu mode.
2. Rotate the [ VFO-B/CLAR ] knob (or press the /
button) to select Menu item "042 MEM GROUP".
3. Press the [ SELECT] button, then rotate the [ VFO-
B/CLAR ] knob (or press the / button) to set this
Menu item to "ENABLE" (the default setting is "DIS-
ABLE").
4. Press the [ SELECT ] button, then press the [ MENU ]
button to save the new setting and exit. Operation
will now be restricted to the six Memory Groups.
To cancel Memory Group operation, repeat steps (1)
through (4) above, choosing "DISABLE" in step (3).
A
:
dvice
To avoid confusion, note that the PMS memory group
and the PMS memories "P-1L" through "P-9U" will be
so designated.

Choosing the Desired Memory Group

You may recall memories just within a particular Memory Group, if desired.
1. Press the [ V/M ] button, if necessary, to enter the
"Memory" mode.
2. Press and hold in the [ MCH/GRP ] button for one
second (located to the Lower right of the [ VFO-B/
CLAR ] knob). The "GRP" icon will appear on the
display.
3. Rotate the [ VFO-B/CLAR ] knob to select the de-
sired Memory Group.
4. Press the [ MCH/GRP ] button. The "MCH" icon will
appear on the display.
5. Rotate the [ VFO-B/CLAR ] knob to select the de-
sired Memory Channel within the Selected Memory
Group.
A
:
dvice
If no channels have been assigned to a particular Memo-
ry Group, you will not have access to that Group.
Page 98
peration
M
eMory
g
roupS
[ SELECT ] Button
[ MENU ] Button
M
eMory
g
M
"oFF"
roup
eMory
01 ~ 19
20 ~ 39
40 ~ 59
60 ~ 79
80 ~ 99
P-1L/1U ~ P-9L/9U
5M-01 ~ 5M-10
FT
1200 O
DX
[ VFO-B/CLAR ] Knob
c
n
hAnnel
uMber
g
M
"on"
roup
eMory
1-01 ~ 1-19
2-01 ~ 2-20
3-01 ~ 3-20
4-01 ~ 4-20
5-01 ~ 5-20
P-1L/1U ~ P-9L/9U
US-1 ~ US-5
[ VFO-B ( RX )] Button
[ V/M ] Button
[ VFO-B/CLAR ] Knob
[ MCH/GRP ] Button
M
peraTing
anual

Advertisement

Table of Contents
loading

Table of Contents