Folded Optics; Advanced Optical Alignment; Boresight Alignment Procedure - Christie M Series Setup Manual

Section 2: Installation and Setup
6. Throw Distance: Ensure the projector is positioned in the throw distance range for the particular lens.

Folded Optics

In rear screen applications where space behind the projector is limited, a mirror may be used to fold the optical
path (Figure 2-7). The position of the projector and mirror must be accurately set - if considering this type of
installation call your dealer for assistance.

2.2.3 Advanced Optical Alignment

Boresight Alignment Procedure

1. Display the Boresight Test Pattern by pressing the T
keypad and press the soft key that displays Test on the LCD display, then U
Boresight, then Enter
2. Focus the image on cross-hair pattern I. Evaluate the focus on cross-hair image II and III. If all 3 images
are in focus, no further action is required. If boresight is required see step 3.
3. If boresight is required, refer to
affect the corresponding cross-hairs on the test pattern.
2-6
F 2-7 F
IGURE OLDED
(Figure 2-8).
F 2-8 B
IGURE ORESIGHT
Figure 2-9 to understand how the adjustment screws on the lens mount
O P
PTICAL ATH
key on the remote keypad or use the built-in
EST
P
ATTERN
A K
to cycle to
P RROW EY
M Series Setup Guide
020-100011-04 Rev. 1 (07-2010)