Table of Contents
Advertisement
ON-SCREEN DISPLAY
No.
Item
4
VCR operation mode
5
Remaining tape
Memo
If the counter display po-
sition is set to the upper
right, this item will be dis-
played on the lower right.
6
Edit mode display
Memo
● With the counter dis-
play shown on the top
left, this display ap-
pears on the bottom
right.
● In the 48 k audio mode,
insert editing is not
possible in the follow-
ing cases.
INS A1, INS A2, INS
VA1, INS VA2
Event display : When certain functions are in use, it is displayed at the following posi-
3 2 K C H – 1 / 2
A
B L A N K S E A R C H
B
I N D E X D E T E C T E D
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
Displays the VCR operation mode, including:
PLAY, EJECT, FF, REW, STANDBY-ON, STANDBY-OFF, STILL,
REC, REC PAUSE, A. DUB, A. DUB PAUSE, ASSEM EDIT, INSERT
EDIT, SHTL (shuttle search), JOG, BLANK SRH (blank search),
NO CASSETTE (cassette tape not loaded), OPERATE OFF.
For SHTL and JOG, the speed is also displayed.
• The display can be turned on/off with VTR MODE in the DISPLAY
Menu screen.
Displays the remaining time of tape (minutes).
Not displayed when the remaining time is being confirmed.
• The display can be turned on/off with TAPE REMAIN in the DIS-
PLAY Menu screen.
• The SP display disappears when a DVCAM cassette tape is be-
ing played back.
• This remaining tape time display is only for reference.
Displays the edit mode selected, e.g., by using the edit mode controller.
• ASSEM :Assemble editing
• INS V
• INS A
• INS VA
• INS VA
• INS TC
Insert editing in the 32 k audio mode
• INS A12 :CH1, CH2 audio
• INS A34 :CH3, CH4 audio
• INS VA12:Video & CH1, CH2 audio
• INS VA34:Video & CH3, CH4 audio
• INS A
• INS VA
The display can be turned on/off with EDIT INFO in the DISPLAY
Menu screen.
tions (with the DISPLAY mode ON or AUTO).
S P
0
0 0
m i n
S T A N D B Y - O F F
T C R 0 2 : 0 0 : 0 0 : 0 0
– Status/Event display –
Description
:Video insert editing
:Audio insert editing (Audio: both CH 1 and CH 2)
:Video, audio insert editing (Audio: both CH 1 and
CH 2)
:Video/Audio insert editing
:Time code insert editing (Time code only)
:CH1 to CH4 audio
:Video & CH1 to CH4 audio
● "A" display: displayed during operation
Display
BLANK
SEARCH
INDEX +1
INDEX MARK
● "B" display: displayed for about 3 seconds
Display
INDEX
DETECTED
VIDEO END
DETECTED
Description
Blank search in progress.
Index search in progress.
The number indicates the index
search position.
When an index has been speci-
fied on the tape during record-
ing.
Description
An index has been detected
during index repeat operation.
The video end has been de-
tected during end repeat op-
eration.
23
Advertisement
Table of Contents
