Using A Non-Linear Editing System - JVC BR-DV6000U Instruction Manual

EDIT
Tape contents of BR-DV6000 are captured by a non-linear editing system and the non-linear edited
contents are recorded on BR-DV6000.
:Connection:
Analog video
VIDEO OUT
VIDEO COMPONENT
LINE
Y/C
IN
R-Y
Y
OUT
MONITOR
IN
OUT
SYNC IN TIME CODE
IN
DV
SIGNAL IN/OUT
DC12V
GND
DV terminal
Control with RS-422A
(Analog signals)
:Setting:
Set the REMOTE/LOCAL switch on the
front panel to REMOTE.
REMOTE (1/2) Menu screen
• Set REMOTE SEL 9-PIN to "ON".
REMOTE (2/2) Menu screen
● REMOTE FF/REW MODE:
Use this item to select the operation to be per-
formed if the FF or REW command is received
during playback. (FF/REW or Search)
If the search operation is not performed prop-
erly, set it to "SEARCH".
● CONTROLLER TYPE (in the REMOTE 2/2
Menu screen):
Set this item to "TYPE1".
Memo
If the time code of BR-DV6000 is not displayed correctly when the non-linear side moves one frame
forward or backward, set the STILL mode to "FRAME."
68
Analog audio
AUDIO OUT
REMOTE2
IN
B-Y
AUDIO
OUT
CH 1/3 CH 2/4
IN
OUT
OUT
OUT
OFF
REC PLAY
MONITOR
SERIAL TIMER
OUT
REMOTE1
REMOTE
IEEE1394 (image, audio, control)
– Using a non-linear editing system –
RS-422A
REMOTE 1 (9P)
Control with the DV terminal
DVí[éqÇ ÉRÉìÉgÉçÅ[ÉãÇ ÇÈèÍçá
(Digital signals)
ÅiÉfÉWÉ^ÉãêMçÜÇ égǧÅj
:Setting:
REMOTE (1/2) Menu screen
● Set REMOTE SEL DV to ON or LOC+REM.
Set this item to ON if it is to become enabled
only when the REMOTE/LOCAL switch on the
front panel is set to REMOTE.
Set this item to LOC+REM if it is to become
enabled regardless of the position of the RE-
MOTE/LOCAL switch.
Non-linear system