Table of Contents
Advertisement
Memo
● For the MIX setting, noise is sometimes gen-
erated. If it occurs, set it to CH-1/2 or CH-3/4.
● In the 48 K audio mode, it is fixed at chan-
nels CH1 and CH2 regardless of the setting
of the switch.
7
[AUDIO MONITOR] switch
Use this switch to select the audio channel for
output signals from the headphone terminal and
the AUDIO MONITOR terminal located on the
rear panel.
The output signal of the AUDIO MONITOR OUT
terminal is monaural.
L
: For outputting the sound of CH1.
MIX : For outputting the mixed sound of CH1
and CH2.
R
: For outputting the sound of CH2.
Memo
In the following conditions, if this switch and the
6
AUDIO OUTPUT switch are used in combi-
nation, the AUDIO MONITOR OUT outputs the
sounds listed as in the following table.
• During playback of tapes recorded in the
32 K audio mode
• In the EE mode for DV input in the 32 K audio
mode
• During audio dubbing
AUDIO switch
MONITOR
OUTPUT
CH-1/2
L
MIX
CH-3/4
CH-1/2
MIX
MIX
CH-3/4
CH-1/2
R
MIX
CH-3/4
MONITOR OUT
output channel
CH1
CH1/3 mix
CH3
CH1/2 mix
CH1/2/3/4 mix
CH3/4 mix
CH2
CH2/4 mix
CH4
8
[COUNTER] switch
The switch changes the contents of the coun-
ter display of the 9 LCD and the monitor.
CTL : It displays the counter in hour, minute,
second and frame based on CTL (con-
trol signal).
TC : It displays the time code data.
UB : It displays the user's bit (UB).
9
LCD
In the playback, still or search mode, it dis-
plays the playback image.
In the recording, recording pause, stop, fast-for-
warding or rewinding mode, it displays the in-
put image.
The following information is also dis-
played.
• Various types of information (status display),
e.g., operation mode, date/time, counter
• Menu screen
• Warning display
☞
(For details,
Page 20)
Memo
*
● Use the
DISP button to enable/disable the
LCD display and the display style.
● LCD-related settings, e.g., brightness adjust-
ment of the LCD, are performed in the DIS-
PLAY MENU screen.
☞
(
Page 39 "Setting the LCD display")
☞
(
Page 82 "DISPLAY MENU screen")
● If the same image pattern is kept displayed
on the LCD display for a prolonged period of
time, "ghosting", the permanent etching of a
pattern on a display screen, may occur. To
prevent this, turn off the LCD display when it
is not in use.
13
Advertisement
Table of Contents
