On-Screen Displays; Counter Display - JVC BR-S622E Instructions Manual

ON-SCREEN DISPLAYS
You can choose the display mode via menu setting. The time
counter, operation mode, and Jog/Shuttle tape speed displays
are available with the initial setting. You can reset the menu
Indicates current operating mode
parameters to obtain any of the following displays:
and Jog/Shuttle tape speed
Time Counter + Operation mode +
Jog/Shuttle tape speed
Operation mode
Time counter
Indicates tape
position in CTL or
TC mode.
CTL interpolation mode
Indicates that displayed TC data is
interpolated with CTL counts.
CTL
: CTLreader data
VTCR : VITC reader data
LTCR : LTC reader data
TCG : Timecode generator data
ETCG : External TC data
VUBR : VITC user bits reader data
LUBR : LTC user bits reader data
ID : ID data
UBG_ : User bits generator data
Counter read-out mode
COUNTER DISPLAY
Resetting the counter
In the CTL mode, you can press the COUNTER RESET button to
reset the time counter to zero.
HOR WNUTE S000
* (RARGGARA |
Delile) I)
[J] &} Ce] =I |
NOTES:
e Stored edit points will be cleared if the COUNTER RESET
button is pressed.
e For details on menu setting and warning code displays, COUNTER RESET button
CF p. 26 and p. 35.
22