Table of Contents
Advertisement
ON-SCREEN DISPLAY
No.
Item
3
Counter display
22
3 2 K C H – 1 / 2
A S S E M
W A R N I N G 7 0 0 1
D R UM MO T O R F A I L U R E
R E C I N H I B I T
0 3 / 0 4 / 0 3
1 1 : 2 0 : 0 0
T C R 0 2 : 0 0 : 0 0 : 0 0
Displays the CTR counter, time code or user's bit. The dis-
played contents can be selected using the COUNTER switch.
• CTL counter: It will be displayed if the COUNTER switch is
• Time code : It will be displayed if the COUNTER switch is
TCG
TCR
DTCG : Time code data received from the DV IN / OUT
ETCG : External time code generator data
Depending on the framing mode, the symbols for the sec-
onds and frames are different (only for NTSC).
00 : 00 : 00 : 00
• User's bit
UBG : User's bit generator data
UBR
DUBG : User's bit reader data received from the DV IN /
EUBG : External user's bit generator data
Memo
● The position of the counter display can be changed with
COUNTER POSI in the DISPLAY Menu screen.
● The counter display can be turned on/off with TIME
CODE in the DISPLAY Menu screen.
– Status display – (continued)
S P
0
0 0
m i n
S T A N D B Y - O F F
Description
set to CTL. The counter shows a 7-digit
number (hour, minute, second and frame) with
+ or – and "CTL" at the beginning, e.g., CTL-
9:30:20:10
set to TC. The time code shows an 8-digit
number (hour, minute, second and frame).
At playback, the time codes recorded on the
tape are displayed.
The prefix indicates the time code mode.
: Time code generator data
: Time code reader data
terminal
Dot (.) for the drop frame mode
¥ Colon (:) for the non-drop frame mode
: it will be displayed if the COUNTER switch is
set to UB.
The user's bit is an 8-digit number (each digit
is a number or character from 0 – F).
The prefix indicates the user's bit mode.
: User's bit reader data
OUT terminal
Advertisement
Table of Contents
