Table of Contents
Advertisement
VIDEO Menu screen
Item
VIDEO
Y/C
INPUT SEL
COMPONENT
SET UP
OFF
(NTSC)
ON
BLACK
OFF
BURST
ON
PAGE BACK
Setting
For selecting the input video signals when the INPUT SELECT
switch on the front panel is set to Y/C (CPN).
Y/C
COMPONENT : Component video signals
For enabling/disabling the application of setups to analog video
signals (composite, Y/C and component).
(During recording and playback)
OFF
ON
Memo
The application of setups on playback or recorded video signals
must match the setting of SET UP. Otherwise, if dubbing is re-
peatedly performed, the hue and brightness of the video may not
appear normal.
For enabling/disabling output of black burst signals of the built-in
signal generator. (When analog input is selected)
OFF
ON
For returning to the TOP MENU screen.
Description
: YC separate signals
: Does not apply setups.
: Applies setups.
: Output off
: Output on. In the RECORDING mode, black burst
signals will be recorded.
79
Advertisement
Table of Contents
