Escort Prism 20401 Reference Manual page 5

CAUTION: Always locate the Prism or Prism SE and its power cord
away from any electrosurgery and diathermy equipment and its power
cord and cables.
CAUTION:
from an AC power source, the wall receptacle must be a three-wire,
grounded, hospital grade outlet. Use only the monitor's original
hospital grade AC power plug and cord, or an equivalent hospital
grade plug and cord. If in doubt about integrity of grounding of the
main supply connection, the unit must be operated by battery power.
CAUTION: DO NOT plug the unit into a multiple outlet power strip
to avoid summation of leakage currents.
CAUTION: Do not use in ambient temperatures above 40° C or below
5° C.
CAUTION:
equipotential connector must be used as a protective ground terminal.
Symbols (Prism & Prism SE)
The following symbols appear on the Prism and Prism SE monitors, and may appear on accessory
items. Familiarize yourself with these symbols and their meaning before using the monitor.
Type CF Defibrillation Protected Equipment: Isolated patient connections
comply with allowable leakage current limits for direct cardiac application
and are protected against effects of defibrillation.
Type CF Applied Part: Isolated Patient connections comply with the
allowable leakage current limits for direct cardiac application.
Attention: Consult accompanying documents.
Replace Fuses as Marked: For protection against fire, replace only with
fuses of same type and rating.
Caution: Dangerous voltage.
Alternating Current: 100-240V @ 50/60 Hz.
Equipotential Connection: When external DC power is used, the
equipotential connection must be used as a protective ground terminal.
Fuse: Voltage and current ratings appear adjacent to symbol.
The CE symbol indicates device conforms to the Medical Device Directive.
Single patient use only.
When operating either the Prism or Prism SE monitor
When using an external DC power source, the
iv