Accessing The Cis Menu - Escort Prism 20401 Reference Manual

NOTE: At power up, the CIS Status Message Zone (item 1 above)
will begin flashing either a "NO CIS FOUND", "SETUP PATIENT",
or "CONFIRM PATIENT" message depending on your configuration.
This indicates the CIS Communication Module was successfully
recognized by the patient monitor. If you do not see the message
after a few moments, contact service personnel to inspect your
monitor

Accessing the CIS Menu

The CIS menu can only be displayed in the Trace 2 waveform zone. The monitor can be set up to
display the CIS menu in this area at all times, or you can elect to display the CIS menu only when
interaction with the CIS is desired. With this display option, the Trace 2 waveform zone can be
used to display vital sign waveform and numeric data whenever the CIS menu is not displayed.
The CIS Menu must be displayed when interacting with the CIS Communication Module to allow
access to menu item functions.
To display a temporary CIS menu:
1. Press the SYSTEM SETUP key to open the System Setup menu.
CLEAR
PT
DATA
2. Press the PT SETUP softkey to display the CIS Menu.
1. CIS Status Message Zone
2. CIS Parameter Label
3. Softkeys for Interfacing with the CIS Menu
4. CIS Menu Display Zone
.
STORE DISP PT
VS VSC SETUP
9-2
HR
TRACE
AUTO MORE
SEL
ECG