Escort Prism 20401 Reference Manual page 37

2. Press the TRACE SEL softkey to open the following menu.
DISP DISP
VSC OCRG
3. Press the softkey under desired TRACE until the parameter to be displayed is highlighted.
Note that the only available parameters are those that are turned ON.
4. Press the PAGE HOME key.
selecting AUTO, the monitor will automatically assign parameters to traces according to the
factory-defined hierarchy. In addition, when AUTO is selected, parameters that already
occupy traces are selection choices.
To select patient monitoring mode (Adult/Pediatric/Neonatal):
1. Press the PATIENT TYPE key to open the following menu.
2. Press the softkey under desired patient type.
3. Press the PAGE HOME key.
4. Note monitor screen displays current patient type in upper left of screen.
5. The monitor holds present monitoring mode until it is changed again.
To set date and time:
1. Press the SYSTEM SETUP key to open the System Setup menu.
CLEAR
PT
DATA
2. Press the MORE softkey to open the following menu.
ADULT
DISP
PED VOL
OCRG
NEO
3. Press the CLOCK softkey to open the following menu.
SET
SEC SEC
SEC
↑ ↑ ↓ ↓
MIN
4. Press the FORM softkey to select the display format.
5. Press the SET softkey to select desired unit to be changed
(SEC, MIN, HOUR, DAY, MONTH, YEAR).
TRACE TRACE TRACE
2 3 4
AUTO AUTO AUTO
The change will occur on the screen. Note that by
ADULT PED
STORE DISP PT
VS VSC SETUP
REC
TIMER CLOCK
SETUP
FORM CLOCK
D/M/Y TIME
M/D/Y OFF
2-4
MORE
NEO
HR
TRACE
AUTO MORE
SEL
ECG
MORE
MORE