Escort Prism 20401 Reference Manual page 167

PED
NEO
Mean: ADULT
PED
NEO
Display Scale: 15, 30, 60, 120, 180, 240 mmHg selectable
Input Connector: Std 6 pin MS, 5 uV/V/mmHg
CARDIAC OUTPUT/HEMODYNAMIC CALCULATIONS
CO Range: 0.1 to 19.99 liters/minute
CO Repeatability: ±2% or 0.2 liters/minute from mean value, whichever is greater, as
measured by electronically generated standard flow curves
REF Range: 1% to 85%
Blood Temperature Range: 17.5 to 43° C
Blood Temperature Accuracy: ±0.5° C from 17.5 to 31° C, ±0.3° C from 31 to 43° C
Injectate Temperature Range: 0 to 27° C
Injectate Temperature Accuracy: ±0.3° C from 0 to 25° C, ±0.5° C from 25.5 to 27° C
Hemodynamic Calculations Provided: CI, SV, SVI, SVR, SVRI, PVR, PVRI, LVSW,
LVSWI, RVSW, RVSWI, REF, PAWP,BSA
Catheters & Accessories: Baxter-Edwards compatible
ETCO (Prism Only)
2
Type: NDIR single beam, ratiometric
Sensor Size: Mainstream: 0.78 x 1.036 x 1.003 inches/1.98 x
2.63 x 2.55 cm (LWD); Sidestream: 6.3 x 3.15 x 2.17 Inches/
160 x 80 x 55 cm (LWD)
Sensor Weight: Mainstream: <10 g, without cable; Sidestream:
1.5 lbs (0.68 kg) with cable
Airway Adapter Dead Space: Mainstream < 6cc (std), 0.6 cc NEO
Altitude/Barometric Pressure Compensation: Automatic
Warm Up: 45 seconds typical
Range: 0 to 99 mmHg
Accuracy: ±2 mmHg or ±5% of reading below 77 mmHg,
±10% above 77 mmHg
Sweep Speed: 1.56, 6.25, 12.5, 25 mm/sec selectable
Display Scale: 50, 75, 100 mmHg
Alarm Limit Range: 5 to 100 mmHg
High Limit Inspired CO
Sampling Flow Rate: Sidestream: 150 cc/min
Response Time: Mainstream: <60 msec max, 30 msec typical;
Sidestream: <100 msec max
Calibration: None required; annual check recommended
O and N O Compensation: Independently selectable
2 2
ETCO (Prism SE Only)
2
Type: Oridion Module
Noise Emission: 45 db
Operating Temperature: 0 to 50° C
Maximum Change Rate in Temperature: 0.5° C
0-150 mmHg
0-150 mmHg
0-200 mmHg
0-170 mmHg
0-170 mmHg
: 4 to 12 mmHg, selectable
2
12-5