System Message Area; Message Area For Parameters In The Wdz; Waveform Display Zone With Associated Numerics; Current Monitoring Mode (Patient Type Selected) - Escort Prism 20401 Reference Manual

7. System Message Area

A message that is not specific to a single parameter, such as "ALARMS SUSPENDED 180", is
displayed in a reverse-video box, just below the WDZ. Message display is temporarily obscured
when a parameter or system setup page is displayed. In the HOME PAGE state, the message
continues to be displayed as long as the message condition exists.

8. Message Area for Parameters in the WDZ

Messages concerning parameters displayed in the WDZ will be displayed in a video box below
the numeric data for the corresponding waveform parameters. The message is displayed as long
as the message condition exists.

9. Waveform Display Zone with Associated Numerics

The Waveform Display Zone displays waveform traces and associated numeric data for as many
as four different parameters. The top waveform trace is reserved for the ECG waveform;
however, you can assign different parameters to the other three waveform traces.

10. Current Monitoring Mode (Patient Type selected)

The current monitoring mode is displayed at the top of the screen — ADULT, PED, or NEO.
The monitoring mode can be changed through the system function key ADULT/PED/NEO.
1-8