Elektronika SCM60ZD-S Manual page 49

(b) Installation of indoor unit
1) Installation dimensions
Ceiling opening
Hanging bolt pitch 530
Control box
B
A
Hanging fixture
Installation Space (front view)
Obstruction
2) Drilling of holes in the wall and fixture of sleeve
The instructions for installation is the same as the SKM type. Please refer to page 46.
3) Preparations for the Main Frame
Mounting of interconnecting wires (Field wiring)
a) Remove the control lid.
b) Connect the connection wire securely to the terminal block.
Use cables for interconnection wiring to avoid loosening of the wires.
CENELEC code for cables Required field cables.
H05 RNR4G1.5 (Example)
H Harmonized cable type
05 300/500 volts
R Natural-and/or synth. rubber wire insulation
N Polychloroprene rubber conductors insulation
R Stranded core
4 Number of conductors
G One conductor of the cable is the earth conductor (yellow/green)
1.5 Section of copper wire (mm
660 (For conventional ceiling)
Drain hose(accessory)
To be installed at site
Inspection port
(For conventional ceiling)
450
570
243
104
E
C
(unit: mm)
1000 or more
(mm)
2
)
Air outlet
202 43
Mark
Model
A Gas tube connecting port
B Liquid tube connecting port
C Drain line tube connecting port
D Power intake
E Hanging bolt
* Please arrange VP25 connector sockets on the installer's part.
Unit: mm
PANEL
Air intake
413
700
Description
25.35ZE-S 50.60ZE-S
ø 9.52 (Flare) ø 12.7 (Flare)
ø 6.35 (Flare)
VP25*
(M10 or M8)
Clamp Terminal block
Control Lid
49