Elektronika SCM60ZD-S Manual page 25

(4) Power blackout auto restart function
(a) Power blackout auto restart function is that records the operational status of the air-conditioner immediately prior to it being
switched off by a power cut, and then automatically resumes operations at that point after the power has been restored.
(b) The following settings will be cancelled:
(i) Timer settings
(ii) High-power operations
¡ SKM model
Notes (1) Power blackout auto restart function is set at on when the air-conditioner is shipped from the factory. Consult with your dealer if this function needs to
be switched off.
(2) When power failure ocurrs, the timer setting is cancelled. Once power is resumed, reset the timer.
(3) If the jumper wire (J7) "REMOTE/AUTORESTART (SKM), AUTORESTART (STM, SRRM) " is cut, auto restart is disabled. (See the diagram at
above)
(5) Flap control (SKM, STM only)
Control the flap by AIRFLOW button on the wireless remote control.
(a) Air scroll
The flap will be automatically set to the angle of air flow best to operation.
(i) Starting time of operation
¡ SKM model
During cooling and
s
dry operation
Stops for approximately
5 seconds in the
horizontal position.
Thick line
Thin line
¡ STM model
During cooling and
s
dry operation
Stops at this position
for 5 seconds.
Thick line : moves quickly
Thin line : moves slowly
(ii) When not operating
The flap closes, when operation has stopped.
¡ STM, SRRM model
t
Stops for approximately
5 seconds in this
: Rapid movement
position.
: Slow movement
t
EXTERNAL INPUT
WIRED REMOCON
OPE PERMISSION
CUSTOM
AUTO RESTART
LO TEMP
DIRT PREVENT
COOL ONLY
HI CEIL
PANEL
50/60
During heating
s t
operation
Thick line
Thin line
During heating
s t
operation
Stops at this position
for 5 seconds.
Thick line : moves quickly
Thin line : moves slowly
: Rapid movement
: Slow movement
25