Elektronika SCM60ZD-S Manual page 29

(d) Hot keep operation
N22, 25, 28, 35 models
If the hot keep operation is selected during the heating operation, the indoor fan is controlled based on the temperature of the
indoor unit heat exchanger (detected with Th
¡ Normal mode (Normal heating operation, operation after HI POWER completion)
Indoor fan
3rd speed
2nd speed
1st speed
Note (1) Refer to the table shown above right for the values A and B.
¡ Hot keep M mode [During HI POWER operation (for 15 min.)]
Indoor fan
2nd speed
1st speed
Note (1) Refer to the table shown above right for the values A and B.
¡ Hot keep T mode (During heating thermostat operation or fuzzy auto; operation except when the deci-
sion speed is 0 rps.)
Indoor fan
2nd speed
(1st speed)
Note (1) Values in ( ) are for type STM, SRRM.
-R ) to prevent blowing of cool wind.
I 1
8th speed
7th speed
6th speed
5th speed
Indoor heat exchanger temp. (˚C)
5th speed
3rd speed
Indoor heat exchanger temp. (˚C)
5th speed
(4th speed)
4th speed
(3rd speed)
3rd speed
(2nd speed)
30 35 40
Indoor heat exchanger temp. (˚C)
10th speed
¡ Values of A, B
At 0 rps command
Other than 0 rps
command
9th speed
7th speed
6th speed
6th speed
(5th speed)
45 50
A B
22 25
17 19
29