Aprs Set Mode Function List - Yaesu FT1DR Instruction Manual

APRS Set mode function list

O 1 APRS AF DUAL
Sound setting for AF Dual Function
Setting Item: ON / OFF
Default: OFF
Explanation:
ON/OFF setting to enable the AF Dual function while APRS function is active.
O 2 APRS DESTINATION
Model Code Display
Setting Item: [APY01D]
Default: [APY01D]
Explanation:
Displays the model code. This setting cannot be changed.
O 3 APRS FILTER
Filter function setting
Setting Item: Mic-E / POSITION / WEATHER / OBJECT / ITEM / STATUS / OTHER /
Default: Mic-E: ON / POSITION: ON
WEATHER: ON / OBJECT: ON
ITEM: ON / STATUS: ON
OTHER: OFF
ALTNET: OFF
Explanation:
For setting FILTER for obtaining various beacon types.
ON: Obtains beacons
OFF: Does not obtain beacons
Mic-E: Displays the obtained MIC-Encoder beacons
POSITION: Displays the obtained Position of beacons
WEATHER: Displays the obtained Weather beacons
OBJECT: Displays the obtained Object of beacons
ITEM: Displays the obtained item of beacons
STATUS: Displays the obtained Status of beacons
OTHER: Displays the obtained packets other than those used in APRS.
ALTNET: Displays the obtained packets specified by Destination Address in Alternate
Nets.
O 4 APRS MODEM
APRS baud rate settings
Setting Item: OFF / 1200bps / 9600bps
Default: OFF
49
ALTNET